AOW15S60/aowf15s60 600v 15a a aa a mos tm power transistor general description product summary v ds @ t j,max 700v i dm 63a r ds(on),max 0.29 w q g,typ 16nc e oss @ 400v 3.6 m j 100% uis tested100% r g tested symbol v ds v gs i dm i ar e ar e as mosfet dv/dt ruggednesspeak diode recovery dv/dt h t j , t stg t l symbol r q ja r q cs r q jc * drain current limited by maximum junction temperature. single pulsed avalanche energy g w 86 p d repetitive avalanche energy c 27.8 208 mjmj avalanche current c 10* 10 junction and storage temperature range t c =25c dv/dt 1.67 20 power dissipation b 173 gate-source voltage va 63 t c =100c pulsed drain current c continuous draincurrent t c =25c i d 600 15* 15 a 2.4 30 c the AOW15S60 & aowf15s60 have been fabricatedusing the advanced a mos tm high voltage process that is designed to deliver high levels of performance androbustness in switching applications. by providing low r ds(on) , q g and e oss along with guaranteed avalanche capability these parts can beadopted quickly into new and existing offline power supply designs. v units parameter absolute maximum ratings t a =25c unless otherwise noted AOW15S60 aowf15s60 drain-source voltage c/w w/ o c c thermal characteristics 0.5 -- c/w maximum junction-to-case 0.6 4.5 c/w derate above 25 o c parameter AOW15S60 0.22 -55 to 150 aowf15s60 100 units v/ns maximum case-to-sink a maximum junction-to-ambient a,d 300 65 65 maximum lead temperature for solderingpurpose, 1/8" from case for 5 seconds j g ds top view to-262 bottom view g d s g d s top view to-262f bottom view g d s g d s aowf15s60 AOW15S60 rev 0: aug 2011 www.aosmd.com page 1 of 6
AOW15S60/aowf15s60 symbol min typ max units 600 - - 650 700 - - - 1 - 10 - i gss gate-body leakage current - - 100 n a v gs(th) gate threshold voltage 2.5 3.2 3.8 v - 0.254 0.29 w - 0.68 0.78 w v sd - 0.83 - v i s maximum body-diode continuous current - - 15 a i sm - - 63 a c iss - 717 - pf c oss - 58 - pf c o(er) - 41.2 - pf c o(tr) - 125.2 - pf c rss - 1.3 - pf r g - 13.4 - w q g - 15.6 - nc q gs - 3.5 - nc q gd - 6.0 - nc t d(on) - 24.5 - ns t r - 22 - ns t d(off) - 84 - ns t f - 24 - ns t rr - 282 - ns i rm - 26 - a q rr - 4.5 - m c this product has been designed and qualified for the consumer market. applications or uses as critical components in life support devices or systems are not authorized. aos does not assume any liability arising out of such applications or uses of its products. aos reserves the right to improve product design, functions and reliability without notice. peak reverse recovery current i f =7.5a,di/dt=100a/ m s,v ds =400v v v gs =10v, i d =7.5a, t j =150c drain-source breakdown voltage i d =250a, v gs =0v, t j =25c m a v ds =0v, v gs =30v v ds =600v, v gs =0v v ds =5v,i d =250 m a v ds =480v, t j =150c zero gate voltage drain currentbody diode reverse recovery charge i f =7.5a,di/dt=100a/ m s,v ds =400v maximum body-diode pulsed current c turn-on delaytime dynamic parameters turn-on rise timeturn-off delaytime body diode reverse recovery time i f =7.5a,di/dt=100a/ m s,v ds =400v reverse transfer capacitance bv dss v gs =10v, v ds =400v, i d =7.5a, r g =25 w turn-off fall time total gate charge v gs =10v, v ds =480v, i d =7.5a gate source chargegate drain charge v gs =10v, i d =7.5a, t j =25c switching parameters i dss effective output capacitance, timerelated i r ds(on) static drain-source on-resistance i s =7.5a,v gs =0v, t j =25c diode forward voltageinput capacitance v gs =0v, v ds =100v, f=1mhz output capacitance vgs=0v, v ds =100v, f=1mhz gate resistance v gs =0v, v ds =0v, f=1mhz electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions i d =250a, v gs =0v, t j =150c effective output capacitance, energyrelated h vgs=0v, v ds =0 to 480v, f=1mhz a. the value of r q ja is measured with the device in a still air environment with t a =25c. b. the power dissipation p d is based on t j(max) =150c, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used.c. repetitive rating, pulse width limited by junction temperature t j(max) =150c, ratings are based on low frequency and duty cycles to keep initial t j =25c.d. the r q ja is the sum of the thermal impedance from junction to case r q jc and case to ambient. e. the static characteristics in figures 1 to 6 are obtained using <300 m s pulses, duty cycle 0.5% max. f. these curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming amaximum junction temperature of t j(max) =150c. the soa curve provides a single pulse rating. g. l=60mh, i as =2.4a, v dd =150v, starting t j =25c h. c o(er) is a fixed capacitance that gives the same stored energy as c oss while v ds is rising from 0 to 80% v (br)dss. i. c o(tr) is a fixed capacitance that gives the same charging time as c oss while v ds is rising from 0 to 80% v (br)dss. j. wavesoldering only allowed at leads. rev 0: aug 2011 www.aosmd.com page 2 of 6
AOW15S60/aowf15s60 typical electrical and thermal characteristics 0 5 10 15 20 25 30 0 5 10 15 20 v ds (volts) figure 1: on-region characteristics@25c i d (a) v gs =4.5v 6v 10v 7v 0.01 0.1 1 10 100 2 4 6 8 10 v gs (volts) figure 3: transfer characteristics i d (a) -55c v ds =20v 25c 125c 0.0 0.2 0.4 0.6 0.8 1.0 0 5 10 15 20 25 30 35 i d (a) figure 4: on-resistance vs. drain current and gate voltage r ds(on) ( w ww w ) v gs =10v 0 0.5 1 1.5 2 2.5 3 -100 -50 0 50 100 150 200 temperature (c) figure 5: on-resistance vs. junction temperature normalized on-resistance v gs =10v i d =7.5a 0.8 0.9 1 1.1 1.2 -100 -50 0 50 100 150 200 t j ( o c) figure 6: break down vs. junction temperature bv dss (normalized) 0 5 10 15 20 25 0 5 10 15 20 v ds (volts) figure 2: on-region characteristics@125c i d (a) v gs =4.5v 5v 10v 6v 5v 5.5v 5.5v 7v rev 0: aug 2011 www.aosmd.com page 3 of 6
AOW15S60/aowf15s60 typical electrical and thermal characteristics 0 3 6 9 12 15 0 5 10 15 20 25 q g (nc) figure 8: gate-charge characteristics v gs (volts) v ds =480v i d =7.5a 1 10 100 1000 10000 0 100 200 300 400 500 600 v ds (volts) figure 9: capacitance characteristics capacitance (pf) c iss c oss c rss 0.01 0.1 1 10 100 1 10 100 1000 v ds (volts) i d (amps) figure 11: maximum forward biased safe operating area for AOW15S60 (note f) 10 m s 10ms 1ms dc r ds(on) limited t j(max) =150c t c =25c 100 m s 0.01 0.1 1 10 100 0.1 1 10 100 1000 v ds (volts) i d (amps) figure 12: maximum forward biased safe operating area for aowf15s60(note f) 10 m s 10ms 1ms 0.1s dc r ds(on) limited t j(max) =150c t c =25c 100 m s 1s 10s 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 1.0e+02 0.0 0.2 0.4 0.6 0.8 1.0 v sd (volts) figure 7: body-diode characteristics (note e) i s (a) 25c 125c 0 2 4 6 8 0 100 200 300 400 500 600 v ds (volts) figure 10: coss stroed energy eoss(uj) e oss rev 0: aug 2011 www.aosmd.com page 4 of 6
AOW15S60/aowf15s60 typical electrical and thermal characteristics 0 5 10 15 20 0 25 50 75 100 125 150 t case (c) figure 14: current de-rating (note b) current rating i d (a) 0 40 80 120 160 200 25 50 75 100 125 150 175 t case (c) figure 13: avalanche energy e as (mj) 0.001 0.01 0.1 1 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 pulse width (s) figure 15: normalized maximum transient thermal impedance for AOW15S60 (note f) z q qq q jc normalized transient thermal resistance d=t on /t t j,pk =t c +p dm .z q jc .r q jc r q jc =0.6c/w in descending orderd=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse single pulse 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 pulse width (s) figure 16: normalized maximum transient thermal impedance for aowf15s60 (note f) z q qq q jc normalized transient thermal resistance d=t on /t t j,pk =t c +p dm .z q jc .r q jc r q jc =4.5c/w in descending orderd=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse single pulse rev 0: aug 2011 www.aosmd.com page 5 of 6
AOW15S60/aowf15s60 - + vdc ig vds dut - + vdc vgs vgs 10v qg qgs qgd charge gate charge test circuit & waveform - + vdc dut vdd vgs vds vgs rl rg vgs vds 10% 90% resistive switching test circuit & waveforms t t r d(on) t on t d(off) t f t off vdd vgs id vgs rg dut - + vdc l vgs vds id vgs bv i unclamped inductive switching (uis) test circuit & waveforms ig vgs - + vdc dut l vds vgs vds isd isd diode recovery tes t circuit & waveforms vds - vds + i f ar dss 2 e = 1/2 li di/dt i rm rr vdd vdd q = - idt t rr ar ar rev 0: aug 2011 www.aosmd.com page 6 of 6
|
